The only battery plates designed from the ground up for the Canon C400.
No retro-fitted universal or generic plates. Just a perfect fit.
With the smallest possible footprint, keep your camera compact without obscuring any of the buttons or I/O on the back of the camera.
auxiliary outputs
each
The DTaps feature a shorter power pin, ensuring accessories remain grounded during connection and disconnection.
With interchangeable connectors, upgrade the DTaps for an optional 2-pin LEMO.
Want a different connector? Let us know and we’ll see what we can do.
There always seems to be one DTap cable that points the wrong way, doesn’t there?
Rotate either aux output for the optimum orientation.
Simply unscrew the captive screws (1.5mm hex), lift out and rotate 180º in the direction of least resistance.
Pack down with ease. With recessed auxiliary outputs, slide the top handle off without needing to remove the battery plate.
(BP-A60/A60N incompatible with Gold mount)
When not using Canon batteries, mount the plate on the lower screws for an even more streamlined build.
In keeping with the compact philosophy, the connector doesn’t stick out and the cable doesn’t block the audio XLR ports.
Milled from high-grade aluminium, anodised and secured with stainless steel hardware, the result is a lightweight and durable product ready to withstand the rigours of any production.
We use only the highest quality components throughout, including genuine connectors from IDX and LEMO.
Soldered and assembled by hand, plus every unit is fully tested prior to being packaged.
than the previous generation of Full Frame Camera Co. battery plates.
Both VMP400 and GMP400 weigh under 200g/7oz.
Transmute into gold and back!
Making the switch from one battery system to the other, or perhaps want the flexibility of having both V-mount and Gold mount on hand?
Swap out the front your battery plate in seconds with a conversion kit – it can even be done without removing from the camera.
Use the new battery plates with the C300MKIII and C500MKII.
Can be mounted directly to the camera or in combination with our Vertical Offset Plate (VOP).
The mounting holes on the C400 are higher than on the C300MKIII/C500MKII.
Use the VOP on the previous cameras to raise the 400 Series battery plates and accommodate hotswapping with Canon batteries.
The VOP can also be used to lower the original Full Frame Camera Co. battery plates on the C400 for a more streamlined build – and still be able to hotswap with Canon batteries.
Personalise your kit by engraving your name or company logo.
It’s the camera equivalent of getting inked.
Stand out on set with custom colour options available.
Choose from a range of colours for the front and back – or mix and match for a two-tone look.
Personalise your kit by engraving your name or company logo.
It’s the camera equivalent of getting inked.
Stand out on set with custom colour options available.
Choose from a range of colours for the front and back – or mix and match for a two-tone look.
CORE
66x82x24mm
2.6×3.2×0.9″
MAXIMUM
72x82x33mm
2.8×3.2×1.3″
(excluding XLR)
192g
6.8oz
(With 2x DTaps)
CORE
66x82x29mm
2.6×3.2×1.1″
MAXIMUM
66x93x29mm
2.6×3.7×1.1″
(excluding XLR)
173g
6.1oz
(With 2x DTaps)
Low profile 4-pin XLR
2x aux outputs: DTap or LEMO 2-pin 0B, (pin 1 ground)
Unregulated voltage, Independently fused, 5A each, max 8A total
Premium camera accessories and bespoke engineering for the film industry.
Designed, manufactured and shipped right from our workshop in Manchester.
We’re not on social media! Find out about new products and updates exclusively via newsletter: